| Minimum Over-coating Interval |
3 hours |
| Maximum Over-coating Interval |
72 hours* |
| Surface should be clean and dry prior to over-coating.
Chalking, if any, must be removed. |
Systems and Compatibility
Can be applied as finish coat on AQUA MASTIC, AQUA ST, AQUA ST-03, AQUA
SEALER.
For more product and system recommendations, please consult
Flosil-BET Coatings (India) Pvt Ltd.
Possible Applications
Aqua PU suitable for use in both new construction and as a maintenance
coating which can be used in a wide variety of environments including
offshore structures, chemical and petrochemical plants, bridges, pulp
and paper mills, and in the power industry. Use Aqua PU on concrete floors
to enhance low permeability to water, colour coding and enhance aesthetics.
| Air Temperature |
5-35°C |
| Substrate Temperature |
50% minimum |
| Relative Humidity |
85% maximum |
|
Surface temperature shall always be at least 3°C above Dew Point. Do
not expose the coated articles where there are chances of
condensation
on the surface.
|
Mixing
Aqua PU is supplied in 2 parts. Always mix liquid (Part B) into the liquid
(Part A) while stirring. 75-100 RPM mixer is recommended. Material
should be screened prior to application.
Surface Preparation
All surfaces to be coated shall be dry and free from oil, grease, dust, dirt
and any foreign matter that can adversely affect adhesion of coating.
Solvent cleaning as per SSPC SP1 shall be conducted
wherever necessary.
Thinning
10 - 20% Aqua T02 as needed.
Airless Spray
Recommended. Tip range: 0.43-0.53 mm at 2500 - 3000 psi tip pressure.
Conventional Spray
Recommended. Do not exceed spray pressure than 4 Kg/Sq.Cm
Brush / Roller
Recommended to use roller and brush.
Available worldwide through Flosil - BET Coatings (India) Pvt Ltd.
Packing Size = 4 Liters.
Shelf Life: 12 Months* from the date of manufacturing
*Material to be stored in sealed and unopened containers in closed shelter.