High Performance Chemical Resistant Glass Flake Coating | AQUA GF (FLOSIL EPOXY GF)

Aqua GF, has excellent resistance to continuous and alternating service for a wide range at chemicals, solvents, caustic, crude and fuel oils, animal and vegetable oils and fats, neutral, alkaline and non-oxidizing salt solutions in water. The principles of chemical resistance because of coating with glass flake act as a, "Tortuous Path.”

Product Information
Method of Application
Environmental
Recommendation of Use

Colour	All RAL ,BS Color
Packing Size	16 Lit
Applied Over	Steel, Non ferrous, FRP, Concrete tank and floor.
Mixing Ratio	Part A : Part B = 6: 1 By Weight
Components	2
Recommended DFT	350 μm ~ 500 μm
Theoretical Coverage	1.87 Sq.m/L ( @ D.F.T. 375μm) Allow for application losses and surface irregularities
Volume Solid	68 ~ 73%
Coating Layer	1-2
Drying time @ 30°C	Touch Dry - 6 to 8 hrs, Hard Dry - 2 to 3 days
Pot life	2 to 3 hrs
Shelf Life	12 Months* from the date of manufacturing. *Material to be stored in sealed and unopened containers in closed shelter at 5 ~ 38°C.

Method	Surface preparation - Steel Non –immersion : Blast all surface in accordance with SSPC –SP10 (“ Near White “ SIS Sa 2 1/2 ) Immersion : Blast all surface in accordance with SSPC –SP5 ( “ White Metal” SIS Sa 3 )
Application Equipment	Conventional or airless spry, power mixer, brush or roller Airless spray, Tip size 0.019 -0.021 inch Output pressure -2200 psi
Thinner	AQUA T01 – add 3% - 5%
Cleaner	AQUA T01
Over-coating interval	Can be over-coated when touch dry.(6 to 8 hrs)

Air temperature : 15 - 50°C
Surface temperature : 15 – 55°C
Relative humidity : up to 40 ~ 85%
The surface temperature must be at least 3°C above the dew point to prevent moisture condensation.

Tank lining for shop tanks, road tankers, barges, railroad cars and storage tanks in the chemical and petrochemical industries.

AQUA GF (FLOSIL EPOXY GF)

CHEMICAL STORAGE LINER PROTECTION

Before application of Aqua GF

After application of Aqua GF

GET IN TOUCH WITH US