We provide high Resistant Coatings to fight of Corrosion.

Corrosion Protection is an area that is utmost concern especially with regards to assets continuity and preservation. In line with our expertise and experience,we have developed and patented products that meet such critical demands and conditions.

Protect metal surfaces from corrosion and rust.

Product Characteristics

A low viscosity, non-solvent type 100% volume solid epoxy coating with excellent adhesion to steel, concrete, metal to metal and non-ferrous metals such as aluminum, stainless steel, titanium, FRP and even glass.

It can be applied in harsh and adverse conditions for e.g., tidal zone areas, underwater applications and also to oily surfaces which gives simplicity of application to the applicator with minimum surface preparation.
Versatile in which it can be applied onto damp or dry surfaces and displays excellent adhesion and compatibility to other coatings. Contains Zirconium and is suitable for rebuilding pitted surfaces up to 5mm.

Solvent free system that is ideal for use for interior of drinking water tanks.
The coating is suitable for use on the floor and interior for the food processing and manufacturing industry, Oil & Gas and power industry.

our work

Product Information

Colour Black, Grey, White and Yellow
Packing Size 16 L pack
Non-Volatile Content 100%
Mixing Ratio Epoxy and Hardener (5:1) by Weight only
Full Cure 30°c in 48 Hours
Pot Life 30 to 40 mins at 30°c
Touch Dry 3 Hours with Walkover of 4 to 8 hours at 30°c
Temperature Resistance 5°c - 150°c
Chemical Resistance 75% H2SO4
Volume Solid 100%
Recommended DFT 100 - 200 µm
Coating Layer 1-2
Theoretical Coverage 10m2/liter (at DFT 100 µm ) * Allow for Application losses and Surface irregularities
Shelf Life At least 24 months when stored in sealed containers
  • Technical Data
  • Application Area
  • Environmental

Technical Data

  • Method of Application
    • Airless spray, Air Spray ( Pressure Pot ), Roller, Brush
    • Airless spray : Point tip size - 0.017 - 0.021 inch
  • Thinner
  • Cleaner
    • Xylene 
      Airless spray : Point tip size - 0.017 - 0.021 inch
  • Over coating interval
    • Can be over-coated when touch dry
  • Mixing
    • Mix components thoroughly and allow 3 to 5 minutes before Painting

Application Area

  • Tanks, Exterior of Steel and Iron Pipes
  • Coating onto GRE / Fiber Glass
  • Offshore structures, marine vessels, FPSO
  • Vessel linings under immersed conditions up to 150°C
  • Concrete Structures
  • Splash Zones, Tidal Zones, Flow Lines, Risers, Jetty's
  • Water Storage Tanks
  • Fishing Boats, Ships & Barges
  • Water Proofing
  • Gratings with minimum surface preparation
  • Offshore structures, marine vessels, FPSO
  • Bridges, Walkways, Bridge bearings, Railings
  • Decks, piping, storage tanks, ballast tanks
  • Acid Linings subject to type of acids
  • Concrete Repairs
  • Pressure Vessels, Storage Tanks, Turbine Ducts / Exhaust
  • Wooden Blocks, Glass, Stainless Steel Products
  • Industrial Floor Coatings
  • Roads (Zebra Crossing, Divider's etc...)


    Blasting or application should NOT be carried out when:

  • Relative humidity is >95%
  • Substrate temperature is below 4°C